This page is a copy of edu/course/homepage/datakom/ht10/labs/routing (Mon, 05 Sep 2011 10:01:46)
Routing Lab
The following hours are scheduled for the routing lab.
Scheduled hours:
| Students | Day | Time | Location |
|---|---|---|---|
| IT3, KandDv3, MastersIn1 | Friday, September 30 | 13:15-17:00 | Pol_1313D and Pol_2315D |
| MasComScie, MasterSino | Monday, October 3 | 08:15-12:00 | Pol_1312D and Pol_1313D |
There are forty computers available in total during the first lab instance on September 30, and forty computers on October 3. For this lab, you will work in groups of two per computer. You're encouraged to attend one of these instances.
The lab is handed in electronically through the personal file area in the Studentportal.
If you finish within the scheduled lab session and there is enough time the TAs can correct the lab on the spot.
Instructions are found below.
Genie Lab Environment
This laboratory exercise is based on the Genie lab environment. Genie is a Linux system that runs off a bootable DVD and is compatible with most PC computers. The system is pre-configured with everything you need to do the laboratory exercises. You can download an ISO-image below and burn it to a DVD that you can run at home if you wish. You will find instructions for the routing lab below.
There will be two scheduled lab sessions in which a computer lab will be set up to run Genie. This means that you can choose to do the labs at home or during the scheduled lab session hours. Note, however, that you won't be able to run Genie in our computer labs outside the scheduled hours. During lab sessions there will be supervision available, something that you naturally will not get at home.
The Genie ISO-file (External link
) is accessible from within the university network.
If you want to run Genie at home, then burn the above file to a DVD make sure your computer is set to boot from DVD.
If you do the labs at the scheduled hours, you do NOT need to bring a DVD yourself.
Lab Instructions
The lab instructions are available as PDF
.